You do not have to replace your sensors directly, but at the least you are going to want to install the Horst Miracle Probe Sensors # T21301VP next to your old sensors. They are positioned in a way that allows the reading to be as accurate as possible. view full answer...
The Valterra Waste Valve Bodies w/ Flexible Cables for RV Black Water and Gray Water Tanks - 72" Item # TC1372 is a correct replacement for your gray and black tank valves. I have attached a picture from the guide to help with placement of the cable/handle. view full answer...
LaSalle Bristol Cable-Actuated RV Waste Valve for Black Water Tank - Spigot to Hub - 72" Cable
Item # 34466N4AB72GMA is the replacement for black water tank valves and comes with the extension cable you were interested in to help open your valve if it's in a hard to reach place. view full answer...
In regards to the Bristol Double RV Waste Valves part # 34466ND13AAR, you can replace both the black valve section using the Bristol Waste Valve Body for RV Black Water part # 34439240 and the grey valve section using the Bristol Waste Valve Body for RV Gray Water part # 34439241. view full answer...
There is not a way to replace the black water line on the LaSalle Bristol Cable-Actuated RV Waste Valve for Black Water Tank # 34466N4AB96GMA, unfortunately.
Since you mentioned that your black water line broke, you're going to have to replace the entire waste valve.
We do offer the Replacement Handle for LaSalle Bristol Cable-Actuated RV Waste Valves # 34490CMA1 as a replacement part, should you ever need it. view full answer...
Yes, the SeeLeveL RV Holding Tank Monitor for fresh, gray, black - water pump and heater switch, # SE74VR is designed specifically to be a replacement for older tank monitoring systems. The SeeLeveL # SE74VR uses sensors that are sold separately for single-digit accuracy. The SeeLeveL sensors are mounted on the outside of the tanks, this means they are easy to install, won’t give false readings due to debris, and are easy to maintain. The SeeLeveL tank monitoring system uses technology... view full answer...
The gray water tank valve on the Bristol Double RV Waste Valves part # 34466ND13AAR can be replaced using the Bristol Waste Valve Body for RV Gray Water part # 34439241 or the Valterra Bladex Waste Valve Body for RV Gray Water Tank part # T1001VP. If you just want the seals then that would be the Valterra Bladex RV Waste Valve Seals part # T1001-9VP. view full answer...
I suggest replacing with the Valterra Waste Valve for RV Black Water Tank - Twist On - 3" Bayonet Hooks to 3" Lug
Item # T58. We offer this as a complete replacement assembly. view full answer...
If you're wanting to only replace the valves then you just need the Valterra Bladex Waste Valve Body for RV Black Water Tank # T1003VP and Valterra Bladex Waste Valve Body for RV Gray Water Tank # T1001VP. You can just unbolt the old valves from your setup and swap in these new valves for an easy peasy installation. view full answer...
Here is a list of the replacement valve handles we currently carry. You will need to match them with the waste valves you have on your 1978 Taurus travel trailer as I am unable to determine what valves came on your camper.
Replacement Handle for LaSalle Bristol Cable-Actuated RV Waste Valves Gray # 34490CMA1G, Black # 34490CMA1.
Replacement Handle for LaSalle Bristol Waste Valves Gray # 34466IHANDLEGRY, Black # 34466IHANDLE.
Replacement Handle for Bladex and Valterra Waste Valves Gray... view full answer...
The Replacement Check Valve/Vacuum Breaker # A10-3050 matches what you currently have only it is constructed of clear plastic rather than the black plastic. view full answer...
I do have replacement parts for your 2021 Forest River Salem FSX Travel Trailer. You will have lots of options. There are different cutout diameters and flange diameters for your city water connection inlet. If your cutout diameter is 1-1/2", you can use the RV City Water Inlet with Brass Check Valve - 1/2" MPT - Metal Flange - Surface Mount - White, part # 37262165. You will have to measure the cutout diameter and the flange diameter to determine which part will work for you. It can connect... view full answer...
I called my contact at Camco about the replacement lid for a propane tank cover.
The replacement lid, part # CAM40543 is designed to fit dual propane tank covers # CAM40523 or # CAM40542. These measure 20 inches long by 5 inches wide and includes the mounting hardware. This is the Polar White cover. If you need a Black cover the same size you would want part # CAM40549. view full answer...
The valves you are seeking to replace are made by many different manufacturers and are a standard size. The function of the valve is what you want to pay attention to as there are T-handle and cable options and then of course black water versus gray water as well as different diameters for those gray water applications.
For your 3 inch valve, the LaSalle Bristol Cable-Actuated RV Waste Valve - Black Water Tank - Spigot to Spigot - 72" Cable # 34466N4BB72GM will work well for you and... view full answer...
I can definitely help you figure out what replacement valve you need for the black water system on your 2004 Mckenzie Medallion, but I'll need you to take a look at your system first since we don't have any kind of information on what waste valves you need.
The black water side of things uses a 3" diameter pipe so you just need to determine whether your replacement valve needs hub or spigot connections. A hub fitting installs over a spigot fitting so you'll be able to tell what you need... view full answer...
When black water sewer handles get difficult to move, I recommend the Valterra Gray Water Drain Adapter for RV Black Water Waste Valve # T1020-5VP to clean it out and then replace the valve with a new one that just bolts into place like the Valterra Bladex Waste Valve Body for RV Black Water Tank - Plastic Handle - 3" Diameter # T1003VP. There are times the gaskets go bad and make the operation less than ideal and you want them replaced before you have a mess.
Make sure you are using... view full answer...
Thank you for the photo of the identification sticker on your Ventline range hood vent. Ventline no longer offers a replacement switch for this vent model.
If you want to try a quick fix some aerosol electrical contact cleaner like Caig De-Oxit or a similar product found at your local hardware store may dissolve any contaminants inside the switch or you can simply replace the vent with a new one. If you want to try the contact cleaner you'll want to apply it, operate the switch back and... view full answer...
Look on the valve and see if you can see a brand on it. With that we can see if we have a valve body replacement you could use that would allow for an easier replacement. For example if its a Valterra Bladex you would want the part # T1003VP. Or if it was a LaSalle Bristol you'd want the part # 34439240. view full answer...
If your gray water tank is leaking at/around the seal for the waste gate housing, you will need to replace. The LaSalle Bristol Cable-Actuated RV Waste Valve for Gray Water Tank, # 34466N11AB60GM has a 60" cable with an easy-to-grip handle on the end that mounts in a convenient location. This installs on a 1-1/2" pipe. Use LaSalle Bristol ABS Solvent Cement - Black, # 3447530889 to install the valve. view full answer...
If you're only trying to replace the gate valve and not wanting to cut any pipes then you can just unbolt the gate valves fro their mounting flanges by removing the four bolts holding them in place. You can then pull the pipes back slightly to pop the gate valve out and swap in the new one and bolt it back in place using the same bolts. You can use part # T1001VP for the gray tank and part # T1003VP for the black tank.
I've attached a video below of a double waste valve I replaced where... view full answer...
Go To Results